THE BEST DEALS IN THE USA                                         SHIPPING  FOR ALL ITEMS                                          BUY WITH CONFIDENCE                                          KEEP  CHECKING  FOR MORE GREAT DEALS 
 
   

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   Support  
 
 
 
 

 
 

INSTRUCTIONS & SUPPORT !!!

 

LOOK VIDEO SUPPORT HERE:

http://www.rhinoco.com.au/product/PTX

 

Please note: if you programming 4 different remotes, you have to adjust and program the remote with the highest frequency first and only,
 

Remote Controls Which Can Be Duplicated By LRT-1

 

PLEASE NOTE:

Will NOT Duplicate "rolling code" "Code-Rotating," "Mega-Code," or other proprietary    transmitters like the Genie Intellicode or Lift-Master Security +

Procedures For Copying Existing Remote to LRT-1

 

 

Remote Controls Which Can Be Duplicated By RMC-600

Common Garage Door / Gate Openers Frequencies *
*
Can "Duplicate" Frequencies between 255Mhz - 500Mhz

300 MHz 310 MHz 390 MHz
Ambassador
Multi-Code
Multi-Elmac
Automatic Doorman
Linear
Delta
Powerlift
Shima
Stanley
Vemco
X10
Blue Max
Chamberlain
EZ Lift
Genie
Lift-Master
Liftadoor
Master Mechanic
Raynor
Sears
Wayne Dalton
303.875 MHz 288, 312 & 318 MHz 325, 345, & other MHz
Linear
Stanley
Pulsar, Allister, Allstar Genie (prior to 1982)

 

Common Brands of Car Alarm Remotes *
*
Can "Duplicate" Frequencies between 255Mhz - 500Mhz

Alpine / Japan
Audio Vox / USA
Abt / USA
Avita l / USA
Beretta / USA
Clifford / USA
Force / USA
Code Alarm / USA
GT / Italy
Cop / Taiwan
Omega / USA
Wheels / Australia
Seco-Larm / Taiwan
Rondish
Piranha / Italy
Micro / USA
Kidei / Hong Kong
Hawk / Itlay
Golden Bat / Taiwan
Gemini
Gamma / Italy
Car / Taiwan
VSE / USA
Dei / USA
Unfo
Whistler / USA

 

 

 

 

      

     Procedured For Copying your Existing Remote to

 the remocon remote

 

please find out first the frequency of your existing remote, so you can put the jumper on the correct spot!

Look at the diagram below!

if you do not know the frequency of your existing remote you will have to go through all 3 steps to find out your existing remote frequency range!



Step 1

Open the cover of the remocon remote

instructions1




Step 2

instructions2

 

A) Place the remocon in front of your existing control on flat surface.
    (keep away from metal table)
B) Press Buttons from both units simultaneously using two fingers from the same hand.
C) Adjust the frequency (with your other hand) :


1) Holding onto the buttons of both units about 2" (approx) apart.
2) When both transmitters’ LED lights are blinking, notice that the remocon will flash 3 times at a brighter level.
3) Tune the frequency by using the enclosed screw driver.
4) Turn the frequency adjuster clockwise until the LED shows at the brightest point.



Step 3

instructions3

5) Hold on to both transmitters and enlarge the distance (no more than 2 inches)
    between both units.
6) The LED light of the remocon will become weaker. Turn the frequency adjusters clockwise until the
    LED light is at its brightest.

Caution :
If the LED light fails to flash 3 times, (the product designed for three-stage frequency adjustment)
Move Jumper 1 to 3rd stage; if in the last step you can't reach desired frequency (usually 3rd stage @355-500 MHz)




Step 4

instructions4

To Duplicate The code to each function key :

1) Press the buttons of both transmitters at the same time until the LED light flashes 3 times.
> 2) To copy other transmitters of the same frequency, simply press the buttons of the both transmitters
    simultaneously and for the LED light of the remocon the flash 3 times.
    No further frequency adjustment is required is required once the first button is successfully copied.
3) To begin using the remocon remove jumper 2: your remocon is now operational.
    Do Not Discard This Jumper-Tape Or Put It On One Jumper Pole To Save It.




 

 

 

NIKE SHOES

THE BEST DEALS

 

 

 

 

 

 

 

 

 

 

 
Home    |    Products    |    Support    |    Products    |    Paypal       
Copyright 2005, Gabriel LLC. All rights reserved.